Narvi Waders and Impala Wading Boots kit

Narvi II Waders

The Narvi II is based on our old and extremely popular Narvi Wader.

We have of course used all the features that worked so well on the old version, and then added a few extra's!

The Narvi II waders are a top-line waders, where we have sought for and used only the best material on the market. This is a zipper wader, where we have used the best quality waterproof zipper obtainable: The German-made TiZip zipper. Check it, and you immediately see, and feel the quality of this zipper.

The leg cut is asymmetric, and the seams are placed where there is a minimum of stress. Thorough testing has resulted in this design, and it works perfectly. The asymmetric leg cut results in much higher durability and follows the body better, when moving around, meaning less stress on the garment, which in turn means a much lesser risk for leaks.

In this new version, we have even added a little extra space in critical areas for better movability, again causing less stress on the garment and seeming to prevent leaks.

Features:

• Welded 5 layer construction on the wearing parts and 3 layer on the upper part.
• Waterproof German-made TiZip zipper
• 2 outer pockets with water-resistant zippers
• 2 kangaroo-style flip-out inner pockets
• High back design
• Adjustable waist straps
• Adjustable suspenders
• Asymmetric leg cut with no seams
• Build in drying loops
• Build in stretch mesh gravel guard with hook lace
• Neoprene anatomic left and right feet
• 10 sizes – incl. Medium King, Large Long and XL long
• Breathability: 3500-4000 g/ m2 /24 h. (Test method – ASTM 96)
• Waterproofness: 20,000 mm (Test method – ISO 0811)

Choose the right size waders.

Always take care to select the correct size waders, if the waders are too small it will put extra stress on the seams and materials and cause the waders to fail within a short time. 

We have made 3 different shapes of our wader to accommodate different builds, "Standard" size will fit most, "Long" model are made for the long and slim built, "King" are for heavyset built.

CHEST – Around the chest

WAIST – Around the waist

INSEAM – Length of leg (from heel to crouch)

OUTSEAM – Total outer leg-length

FOOT – EUR sizes

We have grouped them for Standard, King, Long and Short sizes. If you are of average build, start with Standard sizes. For slimmer and taller builds try “Long” and for heavier builds use “King” sizes.

STANDARD SIZES

LONG SIZES 

KING SIZES

Maintenance on the T-Zip zippers

A.Jensen Impala Wading Boots

The Impala Wading boots are made to withstand heavy use in both salt and freshwater.

Comes with a "Maxi-Grip" rubber sole made to maximize grip on all slippery surfaces, even in cold conditions. And it is prepared for using studs if needed. The boots are supplied with a bag with loose studs, so you can choose to add studs or don't depending on your preference and/or fishing spot.

As mentioned, we have designed these for use in salt water - meaning, that if they can withstand use in the extremely hard salty environment, they will also work perfectly in freshwater. So we designed them to avoid all features, that will cause problems in the salt. That means no use of metal anywhere in the boot, even the hook laces are made of sturdy nylon. The only metal part is the studs, which can be replaced when worn down...

They are very light, super comfortable to wear, and easy to get in and out of, even when wet.

Features:

• Super lightweight
• Special "Maxi-Grip" Rubber sole
• Superb ankle support
• Nylon Hook laces for durability in saltwater
• Several hook laces make it possible to fasten the laces in different ways for the best personal fit.
• Flexible for the highest comfort
• Available in 8 sizes (40 to 47)